SNMP Browser

MIB Browser

(Zur Zeit liegt die Beschreibung nur in englischer Sprache vor:)

MG-SOFT MIB Browser Professional 11.0 for Windows

MG-SOFT MIB Browser Professional Edition with MIB Compiler is an extremely flexible, technically superb, powerful and user-friendly SNMP Browser. All that makes MG-SOFT MIB Browser the most widely used SNMP Browser running on Microsoft Windows operating systems. MIB Browser lets you monitor and manage any SNMP device on the network (i.e., file or database servers, modems, printers, routers, switches) by using the standard SNMPv1, SNMPv2c and SNMPv3 protocols over IPv4, IPv6 or IPX networks. Along the standard SNMPv3 USM security model, MIB Browser also supports the Diffie-Hellman key exchange model, so that DOCSIS-based SNMPv3 agents (i.e., cable modems, cable modem termination systems, set-top boxes etc.) can be seamlessly contacted and managed.

MG-SOFT MIB Browser Proessional Edition 10.0 for Linux

MG-SOFT MIB Browser Professional Edition with MIB Compiler for Linux is an extremely flexible, technically superb, powerful and user-friendly SNMP Browser running on Linux operating systems. MIB Browser lets you monitor and manage any SNMP device on the network (i.e., file or database servers, modems, printers, routers, switches,...) by using the standard SNMPv1, SNMPv2c and SNMPv3 protocols. Along the standard SNMPv3 USM security model, MIB Browser also supports the Diffie-Hellman key exchange model, so that DOCSIS-based SNMPv3 agents (i.e., cable modems, cable modem termination systems, set-top boxes etc.) can be seamlessly contacted and managed. MIB Browser allows you to perform SNMP Get, SNMP GetNext, SNMP GetBulk and SNMP Set operations. Besides, the software lets you capture the SNMP Trap and SNMP Inform packets that were sent from arbitrary SNMP devices or applications on the network.

---

Features for Version 11.0

• Support for SNMPv1, SNMPv2c and SNMPv3 protocols over UDP or IPX transport layers
• Support for the IPv6 protocol (Internet Protocol Version 6). MIB Browser can perform all SNMP operations also over IPv6 networks
• Support for all SNMPv3 USM security modes: HMAC-MD5 or HMAC-SHA authentication; CBC-DES privacy. Implemented is also support for the CFB-AES-128 privacy protocol, which enhances the standard USM with a strong, 128-bit CFB-AES privacy protocol
• Support for the DOCSIS Diffie-Hellman key ignition algorithm (non USM), for seamless management access to the DOCSIS-based SNMP agents, like cable modems, cable modem termination systems, set-top boxes, etc.
• Support for all SNMP protocol operations: GET, GET NEXT, GET BULK and SET
• Support for receiving SNMPv1, SNMPv2c and SNMPv3 TRAP messages as well as SNMPv2c and SNMPv3 INFORM messages. Receiving notifications on arbitrary UDP (IPv4 or IPv6) or IPX ports. During the startup, the software verifies notification reception status
• Supports sending SNMPv1, SNMPv2c and SNMPv3 TRAP and SNMPv2c and SNMPv3 INFORM messages.
• SNMP agent profiles. To facilitate managing different SNMP agents, MIB Browser now lets you configure and use SNMP agent profiles. Each profile stores all parameters required for accessing and managing a particular SNMP agent on the network. SNMP Agent Profiles window can be accessed throughout the application
.
• Managing SNMPv3 USM user configuration on remote SNMP agents. MIB Browser provides a convenient and user-friendly interface for managing SNMPv3 USM users on remote SNMPv3 agents. The USM user management operations include 'cloning' SNMPv3 USM users, changing their secret authentication and privacy keys, as well as enabling, disabling and deleting USM users



• Generic SNMP Trace window displays SNMP messages exchanged between MIB Browser and SNMP agents. With this feature you can trace SNMP requests sent from any MIB Browser's window, responses to sent SNMP requests as well as received SNMP Trap and Inform notification messages. Traced SNMP messages are displayed in raw hexadecimal dump format as well as in the decoded, human-readable format. All in all, the Generic SNMP Trace window is particularly useful for debugging when developing SNMP agents and for resolving problems in queried SNMP agents
• Selectable binding interface. On computers with two or more network cards, the user can select which network card (interface) should be used by MIB Browser for sending out SNMP requests.
• Supports multiple variable bindings in all SNMP protocol PDUs: GET, GET NEXT, GET BULK, SET, TRAP and INFORM
• SNMP agent snapshots. MIB Browser incorporates a special window for taking and viewing SNMP agent snapshots. An agent snapshot is a MIB tree-like presentation of MIB objects and MIB object instances including the syntax and values of object instances as retrieved from an SNMP agent at a given time by means of the Walk operation
• Comparing SNMP agent snapshots. MIB Browser lets you compare two SNMP agent snapshots side-by-side, showing implemented object instances including their syntax and value. Snapshots can be taken either from two different SNMP agents or from one SNMP agent at different times. Now you can specify what object instances implemented in SNMP agents you want to compare. Furthermore, you can save the entire comparison configuration as a session for future use
• Queried values are resolved and formated according to relevant TEXTUAL-CONVENTION and DISPLAY-HINT MIB definitions.
• SNMP Set window for setting values in remote SNMP agents. Provides a convenient interface for picking the relevant pre-defined values from MIB definitions
• Supports loading any standard or private MIB module (screen shot) that was previously compiled with MG-SOFT MIB Compiler. Besides, the software can store loaded MIBs files to MIB Groups, so that at any later time the whole group of MIB files can be loaded at once.
• MIB Module smart load feature. MIB Browser searches for compiled MIB modules and loads them on the fly, as needed for resolving queried values.
• MIB tree bookmarks for seamless navigation in the MIB tree.



• Remote SNMP Agent Discovery window for performing the remote SNMP agent discovery operation. MIB Browser can be configured to discover SNMP devices that implement a given OID. Now, this window lets you select multiple discovered SNMP agents and start monitoring them in Info windows or create SNMP agent profiles for all discovered SNMP agents with a single command. Additionally, the window lets you take SNMP agent snapshots of multiple SNMP agents or select two SNMP agents and compare them in the Compare SNMP Agent Snapshots window.
• Table View windows for viewing SNMP tables in columnar form. MIB Browser can open any number of Table View windows
• SNMP Table 'editor' with the Add Row feature. The SNMP Table View window now lets the user modify values of writable SNMP table object instances, and send the updated values to the agent, all at once. In the SNMP Table View window the user can now perform SNMP Add Row operation in a straightforward manner.
• Info windows for monitoring arbitrary remote SNMP agents using arbitrary groups of OIDs. MIB Browser can open any number of Info windows. Info windows can log the monitored values to files in the CSV format that can be imported to spreadsheet or database applications for further processing
• Performance Graph window for graphical monitoring of numerical OID values in any number of remote SNMP agents
• MIB Node Properties window for displaying the MIB node and MIB module properties. When displaying MIB node properties the Property window displays all SMI properties of the given node as defined in the MIB definition module
• Diffie-Hellman key generator. This utility lets you generate the manager random and public numbers that can be used for performing the Diffie-Hellman key ignition operation when accessing DOCSIS-based SNMPv3 agents
• ICMP Ping and traceroute commands for non-SNMP management operations.
• Flexible and robust application design. Intuitive and easy to use user interface incorporating the latest industry trends in the user interface design
• MIB Browser installs 224 standard MIB files, with roughly 17000 OID, textual convention and snmp notification definitions.
• Significantly updated and enhanced User Manual with numerous hints and usage examples will help you get the most from MG-SOFT's MIB Browser Professional Edition.

System Requirements für MIB Browser:

• Windows 95 / 98 / ME / NT / 2000 / XP / Server 2003 / Widnows Vista
• Linux: RedHat, Mandrake, Suse, Debian, Slackware (on Intel x86 architectures).

Prices:

The following articles can be bought now directly from the supplier.

MIB Browser Professional Developer`s Edition for Windows 11 Delivery of a CD-ROM (incl. serial number) / plus forwarding expenses License - maintenance for release 11 and updates through release 12 included English WINXP / WINNT / WINME / WIN95 / WIN98 / WIN2000 / WIN2003 / WINVISTA	EUR 861,00
MIB Browser Professional Developer`s Edition for Windows 11 Delivery of a CD-ROM (incl. serial number) / plus forwarding expenses Site license - maintenance for release 11 and updates through release 12 included English WINXP / WINNT / WINME / WIN95 / WIN98 / WIN2000 / WIN2003 / WINVISTA	EUR 714,00
MIB Browser Professional Developer`s Edition for Windows 11 Delivery of a CD-ROM (incl. serial number) / plus forwarding expenses Site license - maintenance for release 11 and updates through release 12 included English WINXP / WINNT / WINME / WIN95 / WIN98 / WIN2000 / WIN2003 / WINVISTA	EUR 605,00
MIB Browser Professional SNMPv1/SNMPv2c Edition for Windows 11 Delivery of a CD-ROM (incl. serial number) / plus forwarding expenses License - maintenance for release 11 and updates through release 12 included English WINME / WINXP / WINNT / WIN95 / WIN98 / WIN2000 / WIN2003 / WINVISTA	EUR 308,00
MIB Browser Professional SNMPv3 Edition for Windows 11 Delivery of a CD-ROM (incl. serial number) / plus forwarding expenses Site licence - maintenance for release 11 and updates through release 12 included English WINVISTA / WIN2003 / WINME / WINNT / WINXP / WIN95 / WIN98 / WIN2000	EUR 406,00
MIB Browser Professional SNMPv3 Edition for Windows 11 Delivery of a CD-ROM (incl. serial number) / plus forwarding expenses License - maintenance for release 11 and updates through release 12 included English WINNT / WINME / WINXP / WIN95 / WIN98 / WIN2000 / WIN2003 / WINVISTA	EUR 475,00